Experienced Hardwood Flooring Refinishing Experts throughout Church Street

GA Flooring offers expert hardwood floor refinishing in Church Street, Georgia. Over time hardwood floors can lose their shine and can become damaged as a result of normal usage. Our team offers a dustless refinishing service that will guarantee to return the original beauty to your hardwood floors.

GA Flooring, Inc has years of experience refinishing hardwood flooring and restoring the natural look of floors. Our team strives to provide experienced hardwood flooring refinishing services guaranteeing that your floors will look like new.

What Type Of Refinishing Do I need?

The two main types of hardwood flooring refinishing compounds are oil based and water based. The main differences between water based and oil based polyurethane is drying type, odor, price, and color. Most on-site finished hardwood has and oil based finish. Prefinished wood can be water or oil based. If you have site finished wood in your home, it is probably oil based. If you choose to switch from an oil based compound to a water based hardwood refinishing compound you must be aware that it will look different than it had previously. Listed below is are several FAQ's about oil and water based hardwood refinishing compounds.

Oil Modified Polyurethane (OMU)

• Is a solvent based polyurethane, contains mineral spirit.
• Much higher in VOCs (Volatile Organic Compounds).
• Ambers (yellow, brownish-orange tones) over time.
• Longer lasting odor.
• Oil interacts with the wood for warmer tones. Gives the wood more depth and color. This is because it is absorbed into the wood and the oil accentuates the wood grain, giving the grain more.
• Oiled wood tends to have a muted shine
• Only option for dark stains.
• Drying time per coat is at least 8 hours (high humidity, low temperature, lack of air movement cause this to vary—sometimes 24 hours plus is needed!) Need to wait overnight between coats.
• Curing— allow finish to cure for 24 hours from final coat before foot traffic and 30 days before placing area rugs. The floor may be walked on (light foot traffic only!) and after about 12 hours after second coat, but remains susceptible to scuffing and marring until completely cured. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!

Water Based/Water Borne Polyurethane

• You can conceivably do a coat every 2-4 hours. This takes 1-2 days off the job versus oil based poly which allows the homeowner to get back to their routine/life sooner.
• Any given coat will dry enough in a few hours so that the owners can walk on it.
• Cost is more expensive (additional charge to use).
• Curing-70% cured after 1 day, 90% cured after 3 days, fully cured in approximately 7 days so area rugs can be placed down after 7 days. Do not replace area rugs until floor is fully cured. The floor may be walked on and furniture replaced after 24 hours, but remains susceptible to scuffing and marring until completely cured. Slight fumes/odors. The day after the final coat most people smell nothing. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!
• VOC compliant.
• Best for natural and light to medium stains, not dark stains.
• Because it sets up so fast, there is little penetration into the wood.
• Feels/looks more “plastic”; tends to have greater reflection and shine.

Contact Us

If you have any questions about our services, please use our contact form to get in touch with us.