Premium Hardwood Flooring Refinishing Experts Dacula

GA Flooring provides professional hardwood floor refinishing in Dacula, Georgia. Over time hardwood floors can lose their shine and can become damaged as a result of normal usage. We offer a dustless refinishing service that will guarantee to return the natural beauty to your hardwood floors.

The GA Flooring, Inc team has years of experience refinishing hardwood flooring in DaculaGeorgia. Our team prides themselves on providing experienced hardwood flooring refinishing services guaranteeing that your floors will look as good as new.

Oil Vs. Water Refinishing

There are two versions of refinishing products for hardwood floors oil based and water based compounds. Some of the differences between oil and water based finishing products are odor, drying time, price, and color. Most on-site finished hardwood has and oil based finish. Prefinished wood can be water or oil based. If you have site finished wood in your home, it is probably oil based. Be aware that if you change to water based, it will look different. Listed below is are several FAQ's about oil and water based hardwood refinishing compounds.

Oil Modified Polyurethane (OMU)

• Is a solvent based polyurethane, contains mineral spirit.
• Much higher in VOCs (Volatile Organic Compounds).
• The color begins to grow yellow or brownish-orange over time
• Longer lasting odor.
• Deep saturation of the oil allows for darker and richer tones
• Oiled wood tends to have a muted shine
• Oil saturates the wood and works the best with only darker stains.
• Drying time per coat is at least 8 hours (high humidity, low temperature, lack of air movement cause this to vary—sometimes 24 hours plus is needed!) Need to wait overnight between coats.
• Curing— allow finish to cure for 24 hours from final coat before foot traffic and 30 days before placing area rugs. The floor may be walked on (light foot traffic only!) and after about 12 hours after second coat, but remains susceptible to scuffing and marring until completely cured. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!

Water Based/Water Borne Polyurethane

• You can conceivably do a coat every 2-4 hours. This takes 1-2 days off the job versus oil based poly which allows the homeowner to get back to their routine/life sooner.
• Coatings will dry enough to walk on in a few hours
• Cost is more expensive (additional charge to use).
• 70% cured after 1 day, 90% cured after 3 days, fully cured in approximately 7 days so area rugs can be placed down after 7 days. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!
• VOC compliant.
• Best for natural and light to medium stains, not dark stains.
• Because it sets up so fast, there is little penetration into the wood.
• Feels/looks more “plastic”; tends to have greater reflection and shine.

Contact Us

If you have any questions about our services, please use our contact form to get in touch with us.