Hardwood Flooring Refinishing throughout Forest

GA Flooring offers professional hardwood floor refinishing services in Forest, GA. Professional hardwood flooring refinishing services can restore your hardwood to its original beauty. We offer a dustless refinishing service that will guarantee to restore the original beauty to your hardwood floors.

GA Flooring, Inc has years of experience refinishing hardwood flooring and restoring the natural look of floors. Our team strives to provide premium hardwood flooring refinishing services ensuring that your floors will look like new.

Oil Refinishing Vs. Water Refinishing

Which should I choose? The two main types of hardwood flooring refinishing compounds are water based and oil based. There are several differences between oil and water based refinishing coatings: drying time, odor, price, and color - not durability. Many on-site finished hardwoods use an oil based compound for hardwood finishing. Prefinished wood can be water or oil based. If you have site finished wood in your home, it is probably oil based. Switching to a water based compound from an oil based one will dramatically change the look of your refinished hardwood. Listed below is are several FAQ's about oil and water based hardwood refinishing compounds.

Oil Modified Polyurethane (OMU)

• Is a solvent based polyurethane, contains mineral spirit.
• Much higher in VOCs (Volatile Organic Compounds).
• Ambers (yellow, brownish-orange tones) over time.
• Odor can last for several days or even weeks.
• Oil allows for richer darker tones by soaking deep into the wood
• The natural oils in the sealer allow for a dull shine
• Darker color tones.
• Drying time per coat is at least 8 hours (high humidity, low temperature, lack of air movement cause this to vary—sometimes 24 hours plus is needed!) Need to wait overnight between coats.
• Curing— allow finish to cure for 24 hours from final coat before foot traffic and 30 days before placing area rugs. The floor may be walked on (light foot traffic only!) and after about 12 hours after second coat, but remains susceptible to scuffing and marring until completely cured. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!

Water Based/Water Borne Polyurethane

• Faster drying times allows for more coats to be applied daily.
• Coatings will dry enough to walk on in a few hours
• Cost is more expensive (additional charge to use).
• Curing-70% cured after 1 day, 90% cured after 3 days, fully cured in approximately 7 days so area rugs can be placed down after 7 days. Do not replace area rugs until floor is fully cured. The floor may be walked on and furniture replaced after 24 hours, but remains susceptible to scuffing and marring until completely cured. Slight fumes/odors. The day after the final coat most people smell nothing. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!
• VOC compliant.
• Best for natural and light to medium stains, not dark stains.
• Because it sets up so fast, there is little penetration into the wood.
• Feels/looks more “plastic”; tends to have greater reflection and shine.

Contact Us

If you have any questions about our services, please use our contact form to get in touch with us.