Hardwood Flooring Refinishing Professionals in Lilburn

GA Flooring offers experienced hardwood floor refinishing in Lilburn, Georgia. If your hardwood floor has lost its beauty through age, damage, or even just wear and tear, it can be brought back to its original beauty. We offer a dustless refinishing service that can guarantee to return the original beauty to your hardwood floors.

For years our team at GA Flooring, Inc has been refinishing hardwood flooring, and returning floors to their original beauty. Our team prides themselves on providing professional hardwood flooring refinishing services guaranteeing that your floors will look like new.

Oil Refinishing Vs. Water Refinishing

The two main types of hardwood flooring refinishing compounds are oil based and water based. There are several differences between oil and water based refinishing coatings: drying time, odor, price, and color - not durability. Most on-site finished hardwood has and oil based finish. Prefinished wood can be water or oil based. If you have site finished wood in your home, it is probably oil based. Switching to a water based compound from an oil based one will dramatically change the look of your refinished hardwood. Listed below is are several FAQ's about oil and water based hardwood refinishing compounds.

Oil Modified Polyurethane (OMU)

• Is a solvent based polyurethane, contains mineral spirit.
• Much higher in VOCs (Volatile Organic Compounds).
• Over time the color can change, darkening or becoming more orange
• Odor can last for several days or even weeks.
• Oil interacts with the wood for warmer tones. Gives the wood more depth and color. This is because it is absorbed into the wood and the oil accentuates the wood grain, giving the grain more.
• Oiled wood tends to have a muted shine
• Oil saturates the wood and works the best with only darker stains.
• Drying time per coat is at least 8 hours (high humidity, low temperature, lack of air movement cause this to vary—sometimes 24 hours plus is needed!) Need to wait overnight between coats.
• Curing— allow finish to cure for 24 hours from final coat before foot traffic and 30 days before placing area rugs. The floor may be walked on (light foot traffic only!) and after about 12 hours after second coat, but remains susceptible to scuffing and marring until completely cured. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!

Water Based/Water Borne Polyurethane

• Faster drying times allows for more coats to be applied daily.
• Fast drying time means foot traffic can resume only hours after the coat is applied.
• Cost is more expensive (additional charge to use).
• 70% cured after 1 day, 90% cured after 3 days, fully cured in approximately 7 days so area rugs can be placed down after 7 days. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!
• VOC compliant.
• Best for natural and light to medium stains, not dark stains.
• Because it sets up so fast, there is little penetration into the wood.
• Feels/looks more “plastic”; tends to have greater reflection and shine.

Contact Us

If you have any questions about our services, please use our contact form to get in touch with us.