Experienced Hardwood Flooring Refinishing in Mableton

GA Flooring provides hardwood floor refinishing services in Mableton, Georgia. Professional hardwood flooring refinishing services can restore your hardwood to its original beauty. Our team offers a dustless refinishing service that will guarantee to return the original beauty to your hardwood floors.

GA Flooring, Inc has years of experience refinishing hardwood flooring and restoring the natural look of floors. Our team prides themselves on providing premium hardwood flooring refinishing services guaranteeing that your floors will look like new.

Oil Vs. Water Refinishing

Which should I choose? The two main types of hardwood flooring refinishing compounds are water based and oil based. Some of the differences between oil and water based finishing products are odor, drying time, price, and color. Most on-site finished hardwood has and oil based finish. Prefinished wood can be water or oil based. If you have site finished wood in your home, it is probably oil based. Switching to a water based compound from an oil based one will dramatically change the look of your refinished hardwood. Listed below is are several FAQ's about oil and water based hardwood refinishing compounds.

Oil Modified Polyurethane (OMU)

• Is a solvent based polyurethane, contains mineral spirit.
• Much higher in VOCs (Volatile Organic Compounds).
• Ambers (yellow, brownish-orange tones) over time.
• Odor (can linger for several days or even weeks).
• Oil interacts with the wood for warmer tones. Gives the wood more depth and color. This is because it is absorbed into the wood and the oil accentuates the wood grain, giving the grain more.
• Presence. The natural oils in the sealer also give the wood a muted shine.
• Only option for dark stains.
• Minimum drying time is 8 hours and can last up to 24 hours or more based on humidity and other environmental factors.
• Curing— allow finish to cure for 24 hours from final coat before foot traffic and 30 days before placing area rugs. The floor may be walked on (light foot traffic only!) and after about 12 hours after second coat, but remains susceptible to scuffing and marring until completely cured. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!

Water Based/Water Borne Polyurethane

• You can conceivably do a coat every 2-4 hours. This takes 1-2 days off the job versus oil based poly which allows the homeowner to get back to their routine/life sooner.
• Any given coat will dry enough in a few hours so that the owners can walk on it.
• Cost is more expensive (additional charge to use).
• Curing-70% cured after 1 day, 90% cured after 3 days, fully cured in approximately 7 days so area rugs can be placed down after 7 days. Do not replace area rugs until floor is fully cured. The floor may be walked on and furniture replaced after 24 hours, but remains susceptible to scuffing and marring until completely cured. Slight fumes/odors. The day after the final coat most people smell nothing. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!
• VOC compliant.
• Best for natural and light to medium stains, not dark stains.
• Because it sets up so fast, there is little penetration into the wood.
• Feels/looks more “plastic”; tends to have greater reflection and shine.

Contact Us

If you have any questions about our services, please use our contact form to get in touch with us.