Hardwood Flooring Refinishing Rockbridge

GA Flooring offers hardwood floor refinishing services in Rockbridge, GA. If your hardwood floor has lost its beauty through age, damage, or even just wear and tear, it can be brought back to its original beauty. Our team offers a dustless refinishing service that will guarantee to return the original beauty to your hardwood floors.

The GA Flooring, Inc team has years of experience refinishing hardwood flooring in RockbridgeGeorgia. Our team prides themselves on providing professional hardwood flooring refinishing services ensuring that your floors will look like new.

What Type Of Refinishing Do I need?

Which should I choose? The two main types of hardwood flooring refinishing compounds are water based and oil based. The main differences between water based and oil based polyurethane is drying type, odor, price, and color. Many on-site finished hardwoods use an oil based compound for hardwood finishing. Prefinished wood can be water or oil based. If you have site finished wood in your home, it is probably oil based. Switching to a water based compound from an oil based one will dramatically change the look of your refinished hardwood. Below you will find several FAQ's about the different types of hardwood refinishing compounds.

Oil Modified Polyurethane (OMU)

• Is a solvent based polyurethane, contains mineral spirit.
• Much higher in VOCs (Volatile Organic Compounds).
• Ambers (yellow, brownish-orange tones) over time.
• Odor can last for several days or even weeks.
• Deep saturation of the oil allows for darker and richer tones
• The natural oils in the sealer allow for a dull shine
• Only option for dark stains.
• Drying time can be anywhere from 8 to 24 hours depending on humidity and other factors
• Curing— allow finish to cure for 24 hours from final coat before foot traffic and 30 days before placing area rugs. The floor may be walked on (light foot traffic only!) and after about 12 hours after second coat, but remains susceptible to scuffing and marring until completely cured. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!

Water Based/Water Borne Polyurethane

• You can conceivably do a coat every 2-4 hours. This takes 1-2 days off the job versus oil based poly which allows the homeowner to get back to their routine/life sooner.
• Coatings will dry enough to walk on in a few hours
• Cost is more expensive (additional charge to use).
• 70% cured after 1 day, 90% cured after 3 days, fully cured in approximately 7 days so area rugs can be placed down after 7 days. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!
• VOC compliant.
• Best for natural and light to medium stains, not dark stains.
• Because it sets up so fast, there is little penetration into the wood.
• Feels/looks more “plastic”; tends to have greater reflection and shine.

Contact Us

If you have any questions about our services, please use our contact form to get in touch with us.