Hardwood Flooring Refinishing in Scottdale

GA Flooring offers hardwood floor refinishing in Scottdale, Georgia. Professional hardwood flooring refinishing services can restore your hardwood to its original beauty. We offer a dustless refinishing service that will guarantee to return the original beauty to your hardwood floors.

The GA Flooring, Inc team has years of experience refinishing hardwood flooring in ScottdaleGeorgia. Our team strives to provide experienced hardwood flooring refinishing services guaranteeing that your floors will look as good as new.

Oil Vs. Water Refinishing

The two main types of hardwood flooring refinishing compounds are oil based and water based. There are several differences between oil and water based refinishing coatings: drying time, odor, price, and color - not durability. Most on-site finished hardwood has and oil based finish. Prefinished wood can be water or oil based. If you have site finished wood in your home, it is probably oil based. Switching to a water based compound from an oil based one will dramatically change the look of your refinished hardwood. Below you will find several FAQ's about the different types of hardwood refinishing compounds.

Oil Modified Polyurethane (OMU)

• Is a solvent based polyurethane, contains mineral spirit.
• Much higher in VOCs (Volatile Organic Compounds).
• Ambers (yellow, brownish-orange tones) over time.
• Longer lasting odor.
• Deep saturation of the oil allows for darker and richer tones
• Presence. The natural oils in the sealer also give the wood a muted shine.
• Darker color tones.
• Drying time per coat is at least 8 hours (high humidity, low temperature, lack of air movement cause this to vary—sometimes 24 hours plus is needed!) Need to wait overnight between coats.
• Curing— allow finish to cure for 24 hours from final coat before foot traffic and 30 days before placing area rugs. The floor may be walked on (light foot traffic only!) and after about 12 hours after second coat, but remains susceptible to scuffing and marring until completely cured. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!

Water Based/Water Borne Polyurethane

• You can conceivably do a coat every 2-4 hours. This takes 1-2 days off the job versus oil based poly which allows the homeowner to get back to their routine/life sooner.
• Fast drying time means foot traffic can resume only hours after the coat is applied.
• Cost is more expensive (additional charge to use).
• 70% cured after 1 day, 90% cured after 3 days, fully cured in approximately 7 days so area rugs can be placed down after 7 days. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!
• VOC compliant.
• Best for natural and light to medium stains, not dark stains.
• Because it sets up so fast, there is little penetration into the wood.
• Feels/looks more “plastic”; tends to have greater reflection and shine.

Contact Us

If you have any questions about our services, please use our contact form to get in touch with us.